2022 - 2026 Honda Civic Auto Start Stop Eliminator Plug and Play 11th Gen Civic
Start/Stop Delete
Fits: 2022 - 2026 Honda Civic
Conversion Type: Auto Start Stop Eliminator
Product Includes: One plug and play auto start stop eliminator module
Lights Included: Not applicable. Module only.
Cutting Required: No cutting required
Programming Required: No programming required
Install Difficulty: Plug and play
Important Notes: Fits 2022 - 26 Honda Civic. Comes in 7 Pin, 8 Pin and 10 Pin versions. Match your A OFF button panel to the photos before ordering.
Pairs well with
Complete your setup
CHOOSE YOUR PIN TYPE BEFORE ADDING TO CART.
The 11th Gen Civic uses 3 different button panels. Compare your center console to the reference photos and the guide below, then pick 7 Pin, 8 Pin or 10 Pin. Not sure? Send us a photo of your button panel and we will confirm the correct one for you.
2022–2026 Honda Civic Auto Start Stop Eliminator Plug and Play 11th Gen Civic
This listing includes one auto start stop eliminator module.
Product Description
This module is designed for 2022–2026 11th Gen Honda Civic models equipped with the factory Auto Idle Stop system.
The module plugs in behind the factory A OFF button and automatically turns off Auto Idle Stop every time the vehicle is started. No more pressing the A OFF button every time you get in the car.
How It Works
Start the vehicle and the module turns Auto Idle Stop off on its own within a few seconds.
The A OFF indicator lights up to confirm the system is off.
If you want Auto Idle Stop back on for a drive, press the factory A OFF button as normal.
Which Pin Type Do I Need?
7 Pin
Button panel with the ECON button above the A OFF button. Common on LX, EX and EX-L trims.
8 Pin
Button panel with the DRIVE MODE switch above the A OFF button, with the parking brake and BRAKE HOLD buttons below. Common on Sport and Touring trims.
10 Pin
Button panel with a +R button above the DRIVE MODE switch. Common on Si and manual transmission models.
Fits
2022 Honda Civic
2023 Honda Civic
2024 Honda Civic
2025 Honda Civic
2026 Honda Civic
Important Fitment Note
Each pin type only fits its matching button panel. Please match your panel to the photos before ordering. Ordering the wrong pin type is the most common fitment issue with this product.
Installation Instructions
1. With the vehicle off, gently pry up and remove the original center console button panel.
2. Unplug the factory connector from the back of the A OFF (Auto Start Stop) button.
3. Plug the eliminator in between the button and the factory harness, then reinstall the panel.
4. Start the vehicle. Installation is complete.
No cutting, splicing or programming required.
Please double check the description and fitment before purchasing.
For any further questions or fitment support please contact us before placing your order.
